In this week's edition of DDDD (Data-driven DD), I'll be going over the real reason why we have been seeing a rally for the past few weeks, defying all logic and fundamentals - retail investors. We'll look into several data sets to see how retail interest in stock markets have reached record levels in the past few weeks, how this affected stock prices, and why we've most likely seen the top at this point, unless we see one of the "positive catalysts" that I mentioned in my previous post, which is unlikely (except for more news about Remdesivir).submitted by ASoftEngStudent to wallstreetbets [link] [comments]
Disclaimer - This is not financial advice, and a lot of the content below is my personal opinion. In fact, the numbers, facts, or explanations presented below could be wrong and be made up. Don't buy random options because some person on the internet says so; look at what happened to all the SPY 220p 4/17 bag holders. Do your own research and come to your own conclusions on what you should do with your own money, and how levered you want to be based on your personal risk tolerance.
Most people who know me personally know that I spend an unhealthy amount of my free time in finance and trading as a hobby, even competing in paper options trading competitions when I was in high school. A few weeks ago, I had a friend ask if he could call me because he just installed Robinhood and wanted to buy SPY puts after seeing everyone on wallstreetbets post gains posts from all the tendies they’ve made from their SPY puts. The problem was, he actually didn’t understand how options worked at all, and needed a thorough explanation about how options are priced, what strike prices and expiration dates mean, and what the right strategy to buying options are. That’s how I knew we were at the euphoria stage of buying SPY puts - it’s when dumb money starts to pour in, and people start buying securities because they see everyone else making money and they want in, even if they have no idea what they’re buying, and price becomes dislocated from fundementals. Sure enough, less than a week later, we started the bull rally that we are currently in. Bubbles are formed when people buy something not because of logic or even gut feeling, but when people who previously weren’t involved see their dumb neighbors make tons of money from it, and they don’t want to miss out.
A few days ago, I started getting questions from other friends about what stocks they should buy and if I thought something was a good investment. That inspired me to dig a bit deeper to see how many other people are thinking the same thing.
Ever since March, we’ve seen an unprecedented amount of money pour into the stock market from retail investors.
Google Search Trends
\"what stock should I buy\" Google Trends 2004 - 2020
\"what stock should I buy\" Google Trends 12 months
\"stocks\" Google Trends 2004 - 2020
\"stocks\" Google Trends 12 months
Robinhood SPY holders
\"Robinhood\" Google Trends 12 months
wallstreetbets' favorite broker Google Trends 12 months
Excerpt from E*Trade earnings statement
Excerpt from Schwab earnings statement
TD Ameritrade Excerpt
cnbc.com Alexa rank
CNBC viewership & rankings
wallstreetbets comments / day
investing comments / day
What we can see from Reddit numbers, Google Trends, and CNBC stats is that in between the first week of March and first week of April, we see a massive inflow of retail interest in the stock market. Not only that, but this inflow of interest is coming from all age cohorts, from internet-using Zoomers to TV-watching Boomers. Robinhood SPY holdings and earnings reports from E*Trade, TD Ameritrade, and Schwab have also all confirmed record numbers of new clients, number of trades, and assets. There’s something interesting going on if you look closer at the numbers. The numbers growth in brokers for designed for “less sophisticated” investors (i.e. Robinhood and E*Trade) are much larger than for real brokers (i.e. Schwab and Ameritrade). This implies that the record number of new users and trade volume is coming from dumb money. The numbers shown here only really apply to the US and Canada, but there’s also data to suggest that there’s also record numbers of foreign investors pouring money into the US stock market as well.
However, after the third week of March, we see the interest start to slowly decline and plateau, indicating that we probably have seen most of those new investors who wanted to have a long position in the market do so.
Pretty much everything past this point is purely speculation, and isn’t really backed up by any solid data so take whatever I say here with a cup of salt. We could see from the graph that new investor interest started with the first bull trap we saw in the initial decline from early March, and peaking right after the end of the crash in March. So it would be fair to guess that we’re seeing a record amount of interest in the stock market from a “buy the dip” mentality, especially from Robinhood-using Millennials. Here’s a few points on my rationalization of this behavior, based on very weak anecdotal evidence
Sentiment & Magic Crayons
As I mentioned previously, this bull rally will keep going until enough bears convert to bulls. Markets go up when the amount of new bullish positions outnumber the amount of new bearish positions, and vice versa. Record amounts of new investors, who previously never held a position in the market before, fueled the bullish side of this equation, despite all the negative data that has come out and dislocating the price from fundamentals. All the smart money that was shorting the markets saw this happening, and flipped to become bulls because you don’t fight the trend, even if the trend doesn’t reflect reality.
From the data shown above, we can see new investor interest growth has started declining since mid March and started stagnating in early April. The declining volume in SPY since mid-March confirms this. That means, once the sentiment of the new retail investors starts to turn bearish, and everyone figures out how much the stocks they’re holding are really worth, another sell-off will begin. I’ve seen something very similar to this a few years ago with Bitcoin. Near the end of 2017, Bitcoin started to become mainstream and saw a flood of retail investors suddenly signing up for Coinbase (i.e. Robinhood) accounts and buying Bitcoin without actually understanding what it is and how it works. Suddenly everyone, from co-workers to grandparents, starts talking about Bitcoin and might have thrown a few thousand dollars into it. This appears to be a very similar parallel to what’s going on right now. Of course there’s differences here in that equities have an intrinsic value, although many of them have gone way above what they should be intrinsically worth, and the vast majority of retail investors don’t understand how to value companies. Then, during December, when people started thinking that the market was getting a bit overheated, some started taking their profits, and that’s when the prices crashed violently. This flip in sentiment now look like it has started with equities.
Technical Analysis, or magic crayons, is a discipline in finance that uses statistical analysis to predict market trends based on market sentiment. Of course, a lot of this is hand-wavy and is very subjective; two people doing TA on the same price history can end up getting opposite results, so TA should always be taken with a grain of salt and ideally be backed with underlying justification and not be blindly followed. In fact, I’ve since corrected the ascending wedge I had on SPY since my last post since this new wedge is a better fit for the new trading data.
There’s a few things going on in this chart. The entire bull rally we’ve had since the lows can be modelled using a rising wedge. This is a pattern where there is a convergence of a rising support and resistance trendline, along with falling volume. This indicates a slow decline in net bullish sentiment with investors, with smaller and smaller upside after each bounce off the support until it hits a resistance. The smaller the bounces, the less bullish investors are. When the bearish sentiment takes over across investors, the price breaks below this wedge - a breakdown, and indicates a start of another downtrend.
This happened when the wedge hit resistance at around 293, which is around the same price as the 200 day moving average, the 62% retracement (considered to be the upper bound of a bull trap), and a price level that acted as a support and resistance throughout 2019. The fact that it gapped down to break this wedge is also a strong signal, indicating a sudden swing in investor sentiment overnight. The volume of the break down also broke the downwards trend of volume we’ve had since the beginning of the bull rally, indicating a sudden surge of people selling their shares. This doesn’t necessarily mean that we will go straight from here, and I personally think that we will see the completion of a heads-and-shoulders pattern complete before SPY goes below 274, which in itself is a strong support level. In other words, SPY might go from 282 -> 274 -> 284 -> 274 before breaking the 274 support level.
Doing TA is already sketchy, and doing TA on something like VIX is even more sketchy, but I found this interesting so I’ll mention it. Since the start of the bull rally, we’ve had VIX inside a descending channel. With the breakdown we had in SPY yesterday, VIX has also gapped up to have a breakout from this channel, indicating that we may see future volatility in the next week or so.
Putting Everything Together
Finally, we get to my thesis. This entire bull rally has been fueled by new retail investors buying the dip, bringing the stock price to euphoric levels. Over the past few weeks, we’ve been seeing the people waiting at the sidelines for years to get into the stock market slowly FOMO into the rally in smaller and smaller volumes, while the smart money have been locking in their profits at an even slower rate - hence an ascending wedge. As the amount of new retail interest in the stock market started slowed down, the amount of new bulls started to decline. It looks like Friday might have been the start of the bearish sentiment taking over, meaning it’s likely that 293 was the top, unless any significant bullish events happen in the next two weeks like a fourth round of stimulus, in which case we might see 300. This doesn’t mean we’ll instantly go back to circuit breakers on Monday, and we might see 282 -> 274 -> 284 -> 274 happen before panic, this time by the first-time investors, eventually bringing us down towards SPY 180.
tldr; we've reached the top
EDIT - I'll keep a my live thoughts here as we move throughout this week in case anyone's still reading this and interested.
5/4 8PM - /ES was red last night but steadily climbed, which was expected since 1h RSI was borderline oversold, leaving us to a slightly green day. /ES looks like it has momentum going up, but is approaching towards overbought territory now. Expecting it to go towards 284 (possibly where we'll open tomorrow) and bouncing back down from that price level
5/5 Market Open - Well there goes my price target. I guess at this point it might go up to 293 again, but will need a lot of momentum to push back there to 300. Seems like this is being driven by oil prices skyrocketing.
5/5 3:50PM - Volume for the upwards price action had very little volume behind it. Seeing a selloff EOD today, could go either way although I have a bearish bias. Going to hold cash until it goes towards one end of the 274-293 channel (see last week's thesis). Still believe that we will see it drop below 274 next week, but we might be moving sideways in the channel this week and a bit of next week before that happens. Plan for tomorrow is buy short dated puts if open < 285. Otherwise, wait till it goes to 293 before buying those puts
5/5 6PM - What we saw today could be a false breakout above 284. Need tomorrow to open below 285 for that to be confirmed. If so, my original thesis of it going back down to 274 before bouncing back up will still be in play.
5/6 EOD - Wasn't a false breakout. Looks like it's still forming the head-and-shoulders pattern mentioned before, but 288 instead of 284 as the level. Still not sure yet so I'm personally going to be holding cash and waiting this out for the next few days. Will enter into short positions if we either go near 293 again or drop below 270. Might look into VIX calls if VIX goes down near 30.
5/7 Market Open - Still waiting. If we break 289 we're probably heading to 293. I'll make my entry to short positions when we hit that a second time. There's very little bullish momentum left (see MACD 1D), so if we hit 293 and then drop back down, we'll have a MACD crossover event which many traders and algos use as a sell signal. Oil is doing some weird shit.
5/7 Noon - Looks like we're headed to 293. Picked up VIX 32.5c 5/27 since VIX is near 30.
5/7 11PM - /ES is hovering right above 2910, with 4h and 1h charts are bullish from MACD and 1h is almost overbought in RSI. Unless something dramatic happens we'll probably hit near 293 tomorrow, which is where I'll get some SPY puts. We might drop down before ever touching it, or go all the way to 295 (like last time) during the day, but expecting it to close at or below 293. After that I'm expecting a gap down Monday as we start the final leg down next week towards 274. Expecting 1D MACD to crossover in the final leg down, which will be a signal for bears to take over and institutions / day traders will start selling again
5/8 Market Open - Plan is to wait till a good entry today, either when technicals looks good or we hit 293, and then buy some SPY June 285p and July 275p
5/8 Noon - Everything still going according to plan. Most likely going to slowly inch towards 293 by EOD. Will probably pick up SPY puts and more VIX calls at power hour (3 - 4PM). Monday will probably gap down, although there's a small chance of one more green / sideways day before that happens if we have bullish catalysts on the weekend.
5/8 3:55PM - SPY at 292.60. This is probably going to be the closest we get to 293. Bought SPY 290-260 6/19 debit spreads and 292-272 5/15 debit spreads, as well as doubling down on VIX calls from yesterday, decreasing my cost basis. Still looks like there's room for one more green day on Monday, so I left some money on the side to double down if that's the case, although it's more likely than not we won't get there.
5/8 EOD - Looks like we barely touched 293 exactly AH before rebounding down. Too bad you can't buy options AH, but more convinced we'll see a gap down on Monday. Going to work on another post over the weekend and do my updates there. Have a great weekend everyone!
submitted by EpiK-Protocol to u/EpiK-Protocol [link] [comments]
On October 20, Eric Yao, Head of EpiK China, and Leo, Co-Founder & CTO of EpiK, visited Deep Chain Online Salon, and discussed “How EpiK saved the miners eliminated by Filecoin by launching E2P storage model”. ‘?” The following is a transcript of the sharing.
Eric: Hello, everyone, I’m Eric, graduated from School of Information Science, Tsinghua University. My Master’s research was on data storage and big data computing, and I published a number of industry top conference papers.
Since 2013, I have invested in Bitcoin, Ethereum, Ripple, Dogcoin, EOS and other well-known blockchain projects, and have been settling in the chain circle as an early technology-based investor and industry observer with 2 years of blockchain experience. I am also a blockchain community initiator and technology evangelist
Leo: Hi, I’m Leo, I’m the CTO of EpiK. Before I got involved in founding EpiK, I spent 3 to 4 years working on blockchain, public chain, wallets, browsers, decentralized exchanges, task distribution platforms, smart contracts, etc., and I’ve made some great products. EpiK is an answer to the question we’ve been asking for years about how blockchain should be landed, and we hope that EpiK is fortunate enough to be an answer for you as well.
Q & A
Deep Chain Finance:
First of all, let me ask Eric, on October 15, Filecoin’s main website launched, which aroused everyone’s attention, but at the same time, the calls for fork within Filecoin never stopped. The EpiK protocol is one of them. What I want to know is, what kind of project is EpiK Protocol? For what reason did you choose to fork in the first place? What are the differences between the forked project and Filecoin itself?
First of all, let me answer the first question, what kind of project is EpiK Protocol.
With the Fourth Industrial Revolution already upon us, comprehensive intelligence is one of the core goals of this stage, and the key to comprehensive intelligence is how to make machines understand what humans know and learn new knowledge based on what they already know. And the knowledge graph scale is a key step towards full intelligence.
In order to solve the many challenges of building large-scale knowledge graphs, the EpiK Protocol was born. EpiK Protocol is a decentralized, hyper-scale knowledge graph that organizes and incentivizes knowledge through decentralized storage technology, decentralized autonomous organizations, and generalized economic models. Members of the global community will expand the horizons of artificial intelligence into a smarter future by organizing all areas of human knowledge into a knowledge map that will be shared and continuously updated for the eternal knowledge vault of humanity
And then, for what reason was the fork chosen in the first place?
EpiK’s project founders are all senior blockchain industry practitioners and have been closely following the industry development and application scenarios, among which decentralized storage is a very fresh application scenario.
However, in the development process of Filecoin, the team found that due to some design mechanisms and historical reasons, the team found that Filecoin had some deviations from the original intention of the project at that time, such as the overly harsh penalty mechanism triggered by the threat to weaken security, and the emergence of the computing power competition leading to the emergence of computing power monopoly by large miners, thus monopolizing the packaging rights, which can be brushed with computing power by uploading useless data themselves.
The emergence of these problems will cause the data environment on Filecoin to get worse and worse, which will lead to the lack of real value of the data in the chain, high data redundancy, and the difficulty of commercializing the project to land.
After paying attention to the above problems, the project owner proposes to introduce multi-party roles and a decentralized collaboration platform DAO to ensure the high value of the data on the chain through a reasonable economic model and incentive mechanism, and store the high-value data: knowledge graph on the blockchain through decentralized storage, so that the lack of value of the data on the chain and the monopoly of large miners’ computing power can be solved to a large extent.
Finally, what differences exist between the forked project and Filecoin itself?
On the basis of the above-mentioned issues, EpiK’s design is very different from Filecoin, first of all, EpiK is more focused in terms of business model, and it faces a different market and track from the cloud storage market where Filecoin is located because decentralized storage has no advantage over professional centralized cloud storage in terms of storage cost and user experience.
EpiK focuses on building a decentralized knowledge graph, which reduces data redundancy and safeguards the value of data in the distributed storage chain while preventing the knowledge graph from being tampered with by a few people, thus making the commercialization of the entire project reasonable and feasible.
From the perspective of ecological construction, EpiK treats miners more friendly and solves the pain point of Filecoin to a large extent, firstly, it changes the storage collateral and commitment collateral of Filecoin to one-time collateral.
Miners participating in EpiK Protocol are only required to pledge 1000 EPK per miner, and only once before mining, not in each sector.
What is the concept of 1000 EPKs, you only need to participate in pre-mining for about 50 days to get this portion of the tokens used for pledging. The EPK pre-mining campaign is currently underway, and it runs from early September to December, with a daily release of 50,000 ERC-20 standard EPKs, and the pre-mining nodes whose applications are approved will divide these tokens according to the mining ratio of the day, and these tokens can be exchanged 1:1 directly after they are launched on the main network. This move will continue to expand the number of miners eligible to participate in EPK mining.
Secondly, EpiK has a more lenient penalty mechanism, which is different from Filecoin’s official consensus, storage and contract penalties, because the protocol can only be uploaded by field experts, which is the “Expert to Person” mode. Every miner needs to be backed up, which means that if one or more miners are offline in the network, it will not have much impact on the network, and the miner who fails to upload the proof of time and space in time due to being offline will only be forfeited by the authorities for the effective computing power of this sector, not forfeiting the pledged coins.
If the miner can re-submit the proof of time and space within 28 days, he will regain the power.
Unlike Filecoin’s 32GB sectors, EpiK’s encapsulated sectors are smaller, only 8M each, which will solve Filecoin’s sector space wastage problem to a great extent, and all miners have the opportunity to complete the fast encapsulation, which is very friendly to miners with small computing power.
The data and quality constraints will also ensure that the effective computing power gap between large and small miners will not be closed.
Finally, unlike Filecoin’s P2P data uploading model, EpiK changes the data uploading and maintenance to E2P uploading, that is, field experts upload and ensure the quality and value of the data on the chain, and at the same time introduce the game relationship between data storage roles and data generation roles through a rational economic model to ensure the stability of the whole system and the continuous high-quality output of the data on the chain.
Deep Chain Finance:
Eric, on the eve of Filecoin’s mainline launch, issues such as Filecoin’s pre-collateral have aroused a lot of controversy among the miners. In your opinion, what kind of impact will Filecoin bring to itself and the whole distributed storage ecosystem after it launches? Do you think that the current confusing FIL prices are reasonable and what should be the normal price of FIL?
Filecoin mainnet has launched and many potential problems have been exposed, such as the aforementioned high pre-security problem, the storage resource waste and computing power monopoly caused by unreasonable sector encapsulation, and the harsh penalty mechanism, etc. These problems are quite serious, and will greatly affect the development of Filecoin ecology.
These problems are relatively serious, and will greatly affect the development of Filecoin ecology, here are two examples to illustrate. For example, the problem of big miners computing power monopoly, now after the big miners have monopolized computing power, there will be a very delicate state — — the miners save a file data with ordinary users. There is no way to verify this matter in the chain, whether what he saved is uploaded by himself or someone else. And after the big miners have monopolized computing power, there will be a very delicate state — — the miners will save a file data with ordinary users, there is no way to verify this matter in the chain, whether what he saved is uploaded by himself or someone else. Because I can fake another identity to upload data for myself, but that leads to the fact that for any miner I go to choose which data to save. I have only one goal, and that is to brush my computing power and how fast I can brush my computing power.
There is no difference between saving other people’s data and saving my own data in the matter of computing power. When I save someone else’s data, I don’t know that data. Somewhere in the world, the bandwidth quality between me and him may not be good enough.
The best option is to store my own local data, which makes sense, and that results in no one being able to store data on the chain at all. They only store their own data, because it’s the most economical for them, and the network has essentially no storage utility, no one is providing storage for the masses of retail users.
The harsh penalty mechanism will also severely deplete the miner’s profits, because DDOS attacks are actually a very common attack technique for the attacker, and for a big miner, he can get a very high profit in a short period of time if he attacks other customers, and this thing is a profitable thing for all big miners.
Now as far as the status quo is concerned, the vast majority of miners are actually not very well maintained, so they are not very well protected against these low-DDOS attacks. So the penalty regime is grim for them.
The contradiction between the unreasonable system and the demand will inevitably lead to the evolution of the system in a more reasonable direction, so there will be many forked projects that are more reasonable in terms of mechanism, thus attracting Filecoin miners and a diversion of storage power.
Since each project is in the field of decentralized storage track, the demand for miners is similar or even compatible with each other, so miners will tend to fork the projects with better economic benefits and business scenarios, so as to filter out the projects with real value on the ground.
For the chaotic FIL price, because FIL is also a project that has gone through several years, carrying too many expectations, so it can only be said that the current situation has its own reasons for existence. As for the reasonable price of FIL there is no way to make a prediction because in the long run, it is necessary to consider the commercialization of the project to land and the value of the actual chain of data. In other words, we need to keep observing whether Filecoin will become a game of computing power or a real value carrier.
Deep Chain Finance:
Leo, we just mentioned that the pre-collateral issue of Filecoin caused the dissatisfaction of miners, and after Filecoin launches on the main website, the second round of space race test coins were directly turned into real coins, and the official selling of FIL hit the market phenomenon, so many miners said they were betrayed. What I want to know is, EpiK’s main motto is “save the miners eliminated by Filecoin”, how to deal with the various problems of Filecoin, and how will EpiK achieve “save”?
Originally Filecoin’s tacit approval of the computing power makeup behavior was to declare that the official directly chose to abandon the small miners. And this test coin turned real coin also hurt the interests of the loyal big miners in one cut, we do not know why these low-level problems, we can only regret.
EpiK didn’t do it to fork Filecoin, but because EpiK to build a shared knowledge graph ecology, had to integrate decentralized storage in, so the most hardcore Filecoin’s PoRep and PoSt decentralized verification technology was chosen. In order to ensure the quality of knowledge graph data, EpiK only allows community-voted field experts to upload data, so EpiK naturally prevents miners from making up computing power, and there is no reason for the data that has no value to take up such an expensive decentralized storage resource.
With the inability to make up computing power, the difference between big miners and small miners is minimal when the amount of knowledge graph data is small.
We can’t say that we can save the big miners, but we are definitely the optimal choice for the small miners who are currently in the market to be eliminated by Filecoin.
Deep Chain Finance:
Let me ask Eric: According to EpiK protocol, EpiK adopts the E2P model, which allows only experts in the field who are voted to upload their data. This is very different from Filecoin’s P2P model, which allows individuals to upload data as they wish. In your opinion, what are the advantages of the E2P model? If only voted experts can upload data, does that mean that the EpiK protocol is not available to everyone?
First, let me explain the advantages of the E2P model over the P2P model.
There are five roles in the DAO ecosystem: miner, coin holder, field expert, bounty hunter and gateway. These five roles allocate the EPKs generated every day when the main network is launched.
The miner owns 75% of the EPKs, the field expert owns 9% of the EPKs, and the voting user shares 1% of the EPKs.
The other 15% of the EPK will fluctuate based on the daily traffic to the network, and the 15% is partly a game between the miner and the field expert.
The first describes the relationship between the two roles.
The first group of field experts are selected by the Foundation, who cover different areas of knowledge (a wide range of knowledge here, including not only serious subjects, but also home, food, travel, etc.) This group of field experts can recommend the next group of field experts, and the recommended experts only need to get 100,000 EPK votes to become field experts.
The field expert’s role is to submit high-quality data to the miner, who is responsible for encapsulating this data into blocks.
Network activity is judged by the amount of EPKs pledged by the entire network for daily traffic (1 EPK = 10 MB/day), with a higher percentage indicating higher data demand, which requires the miner to increase bandwidth quality.
If the data demand decreases, this requires field experts to provide higher quality data. This is similar to a library with more visitors needing more seats, i.e., paying the miner to upgrade the bandwidth.
When there are fewer visitors, more money is needed to buy better quality books to attract visitors, i.e., money for bounty hunters and field experts to generate more quality knowledge graph data. The game between miners and field experts is the most important game in the ecosystem, unlike the game between the authorities and big miners in the Filecoin ecosystem.
The game relationship between data producers and data storers and a more rational economic model will inevitably lead to an E2P model that generates stored on-chain data of much higher quality than the P2P model, and the quality of bandwidth for data access will be better than the P2P model, resulting in greater business value and better landing scenarios.
I will then answer the question of whether this means that the EpiK protocol will not be universally accessible to all.
The E2P model only qualifies the quality of the data generated and stored, not the roles in the ecosystem; on the contrary, with the introduction of the DAO model, the variety of roles introduced in the EpiK ecosystem (which includes the roles of ordinary people) is not limited. (Bounty hunters who can be competent in their tasks) gives roles and possibilities for how everyone can participate in the system in a more logical way.
For example, a miner with computing power can provide storage, a person with a certain domain knowledge can apply to become an expert (this includes history, technology, travel, comics, food, etc.), and a person willing to mark and correct data can become a bounty hunter.
The presence of various efficient support tools from the project owner will lower the barriers to entry for various roles, thus allowing different people to do their part in the system and together contribute to the ongoing generation of a high-quality decentralized knowledge graph.
Deep Chain Finance:
Leo, some time ago, EpiK released a white paper and an economy whitepaper, explaining the EpiK concept from the perspective of technology and economy model respectively. What I would like to ask is, what are the shortcomings of the current distributed storage projects, and how will EpiK protocol be improved?
Distributed storage can easily be misunderstood as those of Ali’s OceanDB, but in the field of blockchain, we should focus on decentralized storage first.
There is a big problem with the decentralized storage on the market now, which is “why not eat meat porridge”.
How to understand it? Decentralized storage is cheaper than centralized storage because of its technical principle, and if it is, the centralized storage is too rubbish for comparison.
What incentive does the average user have to spend more money on decentralized storage to store data?
Is it safer?
Existence miners can shut down at any time on decentralized storage by no means save a share of security in Ariadne and Amazon each.
There’s no difference between encrypted presence on decentralized storage and encrypted presence on Amazon.
The 10,000 gigabytes of bandwidth in decentralized storage simply doesn’t compare to the fiber in a centralized server room. This is the root problem of the business model, no one is using it, no one is buying it, so what’s the big vision.
The goal of EpiK is to guide all community participants in the co-construction and sharing of field knowledge graph data, which is the best way for robots to understand human knowledge, and the more knowledge graph data there is, the more knowledge a robot has, the more intelligent it is exponentially, i.e., EpiK uses decentralized storage technology. The value of exponentially growing data is captured with linearly growing hardware costs, and that’s where the buy-in for EPK comes in.
Organized data is worth a lot more than organized hard drives, and there is a demand for EPK when robots have the need for intelligence.
Deep Chain Finance:
Let me ask Leo, how many forked projects does Filecoin have so far, roughly? Do you think there will be more or less waves of fork after the mainnet launches? Have the requirements of the miners at large changed when it comes to participation?
We don’t have specific statistics, now that the main network launches, we feel that forking projects will increase, there are so many restricted miners in the market that they need to be organized efficiently.
However, we currently see that most forked projects are simply modifying the parameters of Filecoin’s economy model, which is undesirable, and this level of modification can’t change the status quo of miners making up computing power, and the change to the market is just to make some of the big miners feel more comfortable digging up, which won’t help to promote the decentralized storage ecology to land.
We need more reasonable landing scenarios so that idle mining resources can be turned into effective productivity, pitching a 100x coin instead of committing to one Fomo sentiment after another.
Deep Chain Finance:
How far along is the EpiK Protocol project, Eric? What other big moves are coming in the near future?
The development of the EpiK Protocol is divided into 5 major phases.
(a) Phase I testing of the network “Obelisk”.
Phase II Main Network 1.0 “Rosetta”.
Phase III Main Network 2.0 “Hammurabi”.
(a) The Phase IV Enrichment Knowledge Mapping Toolkit.
The fifth stage is to enrich the knowledge graph application ecology.
Currently in the first phase of testing network “Obelisk”, anyone can sign up to participate in the test network pre-mining test to obtain ERC20 EPK tokens, after the mainnet exchange on a one-to-one basis.
We have recently launched ERC20 EPK on Uniswap, you can buy and sell it freely on Uniswap or download our EpiK mobile wallet.
In addition, we will soon launch the EpiK Bounty platform, and welcome all community members to do tasks together to build the EpiK community. At the same time, we are also pushing forward the centralized exchange for token listing.
Some KOLs said, Filecoin consumed its value in the next few years, so it will plunge, what do you think?
First of all, the judgment of the market is to correspond to the cycle, not optimistic about the FIL first judgment to do is not optimistic about the economic model of the project, or not optimistic about the distributed storage track.
First of all, we are very confident in the distributed storage track and will certainly face a process of growth and decline, so as to make a choice for a better project.
Since the existing group of miners and the computing power already produced is fixed, and since EpiK miners and FIL miners are compatible, anytime miners will also make a choice for more promising and economically viable projects.
Filecoin consumes the value of the next few years this time, so it will plunge.
Regarding the market issues, the plunge is not a prediction, in the industry or to keep learning iteration and value judgment. Because up and down market sentiment is one aspect, there will be more very important factors. For example, the big washout in March this year, so it can only be said that it will slow down the development of the FIL community. But prices are indeed unpredictable.
Actually, in the end, if there are no applications and no one really uploads data, the market value will drop, so what are the landing applications of EpiK?
Leo: The best and most direct application of EpiK’s knowledge graph is the question and answer system, which can be an intelligent legal advisor, an intelligent medical advisor, an intelligent chef, an intelligent tour guide, an intelligent game strategy, and so on.
submitted by mPrestige to revain_org [link] [comments]
4. Transaction FeesTransferring funds across the blockchain and withdrawing them from Bittrex costs a fee for customers, with the rate unique for every coin.
Bittrex Global charges no commission for deposits. Please keep in mind that some tokens or cash may be required to perform a transaction by a crypto coin or token’s community. Bittrex crypto exchange can’t keep away from it.
Every token or coin has a blockchain transaction fee that is built in it, and the Bittrex fee is a small amount to cover this charge. You can view the fee percentage for every coin or token by clicking Withdrawal near to the coin. There you will see a transaction fee you will be charged for withdrawing a specific coin or token.
In the example below, the withdrawal fee amounts to 1 USDT
The transaction fee for Bitcoin came to 0.00050000 BTC
5. Trading FeesThe fee schedule below provides the applicable rate based on the account's 30-Day Volume and if the order is a maker or taker.
Bittrex Global Fee30 Day Volume (USD)MakerTaker$0k - $50k0.2%0.2%$50k - $1M0.12%0.18%$1M - $10M0.05%0.15%$10M - $60M0.02%0.1%$60M+0%0.08%>$100MContact TAM representative
Trading expenses are incurred when an order is prepared by means of the Bittrex worldwide matching engine. While an order is being executed, the purchaser and the vendor are charged a rate primarily based on the order’s amount. The fee charged by Bittrex exchange is calculated by the formula amount * buy rate * fee. There aren't any charges for placing an order which is not being executed so far. Any portion of an unfinished order will be refunded completely upon order cancelation.
Prices vary depending on the currency pair, monthly trade volume, and whether the order is a maker or taker. Bittrex reserves the right to alternate fee quotes at any time, including offering various discounts and incentive packages.
Monthly VolumeYour buying and selling volume affects the fee you pay for every order. Our expenses are built to encourage customers who ensure liquidity in the Bittrex crypto exchange markets. Your buying and selling charges are reduced according to your trade volume for the last 30 years in dollars.
Bittrex calculates the 30-day value every day, updating every account's volume calculation and buying and selling charge between of 12:30 AM UTC and 01:30 AM UTC every day.
You can check your monthly trade volume by logging in and opening Account > My Activity.
6. Withdrawing FundsWithdrawing any type of funds is likewise simple. You can profit by buying and selling Bitcoin, Ether, or any other cryptocurrency.
You determine the crypto address—to which the amount will be credited—and the transaction amount. The withdrawal fee will be automatically calculated and shown right away.
After confirming the transaction, the finances will be sent to the specified addresses and all that you need to do is to wait for the community to confirm the transaction.
If the 2FA is enabled, then the user receives a special code (via SMS or application) to confirm the withdrawal.
7. How to Trade on Bittrex GlobalCurrency selling and buying transactions are performed using the Sell and Buy buttons, accordingly.
To begin with, the dealer selects a currency pair and sees a graph of the rate dynamics and different values for the pair.
Below the chart, there is a section with orders where the user can buy or sell a virtual asset.
To create an order, you just need to specify the order type, price, and quantity. And do not forget about the 0.25% trade fee whatever the quantity.
For optimum profit, stay with liquid assets as they can be quickly sold at a near-market rate effective at the time of the transaction. Bittrex offers no referral program; so buying and selling crypto is the easiest way to earn.
Order TypesBittrex helps you alternate Limit and Stop-Limit orders.
A limit order or a simple limit order is performed when the asset fee reaches—or even exceeds—the price the trader seeks. To execute such an order, it is required that there's a counter market order on the platform that has the identical fee as the limit order.
Differences between Limit Order and Stop Limit OrderA stop limit order is a mixture of a stop limit order and a limit order. In such an application, charges are indicated—a stop charge and the limit.
Stop Limit Order Purposehttps://preview.redd.it/hlxvy9ti4zh51.jpg?width=1141&format=pjpg&auto=webp&s=064a77459a4dcb4555a885cbc56629aae10fc38b
Trade TerminalLet’s discuss how you could trade conveniently with our service.
The key features include a user-friendly interface and precise currency pair statistics (timeframe graphs, network data, trade volumes, and so forth).
The platform’s top-notch advantage is handy, easy-to-analyze, customizable charts. There is also a column for quick switching between currency pairs and an order panel beneath the fee chart. Such an all-encompassing visual solution helps compare orders efficiently and in one place.
You can use the terminal in a day or night mode; when in the night mode, the icon in the upper-right corner changes and notice the Bittrex trading terminal in night mode is displayed. The main menu consists of 4 sections: Markets, Orders, Wallets, Settings.
Markets are the trade section. Bittrex allows handling over 270 currency pairs.
Orders. To see all open orders, go to Orders → Open.
To see completed orders, go to Orders → Completed.
Wallets. The Wallets tab displays many wallets for all cryptocurrencies supported by the exchange and the current balance of each of them.
After refilling the balance or creating a buy or sale order, you will see all actions in the section. Bittrex allows creating a separate wallet for every coin. Additionally, you can see how the coin price has changed, in terms of percentage, throughout the day.
Here’s what you can also do with your wallets:
How to SellThe process of selling crypto assets follows the same algorithm. The only difference is that after choosing the exchange direction, you need to initiate a Sell order. All the rest is similar: you select the order type, specify the quantity and price, and click Sell *Currency Name* (Sell Bitcoin in our case).
If you scroll the screen, the entire history of trades and orders will be displayed below.
LONG and SHORTYou can make a long deal or a short deal. Your choice depends on whether you expect an asset to fall or rise in price.
Long positions are a classic trading method. It concerns purchasing an asset to profit when its value increases. Long positions are carried out through any brokers and do not require a margin account. In this case, the trader’s account must have enough funds to cover the transaction.
Losses in a long position are considered to be limited; no matter when the trade starts, the price will not fall below zero with all possible errors. Short positions, in contrast, are used to profit from a falling market. A trader buys a financial instrument from a broker and sells it. After the price reaches the target level, the trader buys back the assets or buys them to pay off the initial debt to the broker.
A short position yields profit if the price falls, and it is considered unprofitable the price matches the asset value. Performing a short order requires a margin account as a trader borrows valuable assets from a broker to complete a transaction. Long transactions help gain from market growth; short from a market decline.
Trade via APIBittrex also supports algorithmic trading through extensive APIs (application programming interface), which allows you to automate the trading process using third-party services.
To create an API key, the user must enable the two-factor authentication 2FA, verify their account, and log in to the site within 3 minutes.
If all the requirements of the system are fulfilled, you can proceed to generate the API key. Log in to your Bittrex account, click Settings. Find API Keys. Click Add new key (Create a new key).
Toggle on / off settings for READ INFO, TRADE, or WITHDRAW, depending on what functionality you want to use for our API key.
Click Save and enter the 2FA code from the authenticator → Confirm.
The secret key will be displayed only once and will disappear after the page is refreshed. Make sure you saved it!
To delete an API key, click X in the right corner for the key that you want to delete, then click Save, enter the 2FA code from the authenticator and click Confirm.
Bittrex Bot, a Trader’s AssistantRobotized programs that appeared sometimes after the appearance of cryptocurrency exchanges save users from monotonous work and allow automating the trading process.
Bots for trading digital money work like all the other bots: they perform mechanical trading according to the preset parameters.
Currently, one of Bittrex’s most popular trading bots is Bittrex Flash Crash Buyer Bot that helps traders profit from altcoin volatility without missing the right moment.
The program monitors all the market changes in the market every second; also, it even can place an order in advance. The Bittrex bot can handle a stop loss—to sell a certain amount of currency when the rate changes in a favorable direction and reaches a certain level.
8. Secure PlatformBittrex Global employs the most reliable and effective security technologies available. There are many cases of theft, fraud. It is no coincidence that the currency is compared to the Wild West, especially if we compare the 1800s when cowboys rushed to the West Coast of America to earn and start something new in a place that had no rules.
Cryptocurrency is still wild. One can earn and lose money fast. But Bittrex has a substantial security policy thanks to the team’s huge experience in security and development for companies such as Microsoft, Amazon, Qualys, and Blackberry.
The system employs an elastic, multi-stage holding strategy to ensure that the majority of funds are kept in cold storage for extra safety.
Bittrex Global also enables the two-factor authentication for all users and provides a host of additional security features to provide multiple layers of protection.
Bittrex cold wallet: https://bitinfocharts.com/en/bitcoin/address/385cR5DM96n1HvBDMzLHPYcw89fZAXULJP
How to Pass IP VerificationTo ensure higher security of your Bittrex Global account, the system requires all users to approve each new IP address through an email confirmation. This IP verification procedure is required every time you attempt to log in from a new IP Address.
Confirming your IP address.
The new IP address must be confirmed from the device that you are using to access Bittrex Global. This means that you must follow the CLICK HERE TO LOGIN link in an email on the device that you want to use to access your account.
To ensure even more security, Bittrex Global supports whitelisting of IP addresses and Crypto addresses. These two features can help protect the account in the event of credentials or API key loss.
How to Add IP Address to WhitelistBy setting one or more whitelisted addresses, you are telling Bittrex Global to only authorize trades or withdrawals from those IPs. This concerns both the global.bittrex.com web interface and API-based trades or withdrawals. To do this, click IP Whitelist in Site Settings.
How to Add Crypto Address to WhitelistBy setting a withdrawal address, you are telling Bittrex Global to authorize withdrawals only to that address.
This concerns both the global.bittrex.com web interface and API based withdrawals.
Note that when opting into this feature, you need to specify a withdrawal address would like to withdraw funds from for every currency. To do this, click Withdrawal Whitelist in the Site Settings section. The example below shows a BTC address.
AfterwordBittrex Global is a reliable and advanced platform for trading digital assets with a respected reputation, long history, and active market presence and development nowadays. The exchange is eligible to be used globally, including the US and its territories.
The legal component of Bittrex Global is one of the most legitimate among numerous crypto-asset exchanges.
The Bittrex team has had great ambitions and managed to deliver promises and more. The exchange staff comprises forward-thinking and exceptional individuals whose success is recognized in the traditional business and blockchain sector.
Bittrex's purpose is to be the driving force in the blockchain revolution, expanding the application, importance, and accessibility of this game-changing technology worldwide.
The exchange fosters new and innovative blockchain and related projects that could potentially change the way money and assets are managed globally.
Alongside innovation, safety will always be the main priority of the company. The platform utilizes the most reliable and effective practices and available technologies to protect user accounts. Bittrex customers have always primarily been those who appreciate the highest degree of security.
Because of the way the Bittrex trading platform is designed, it can easily scale to always provide instant order execution for any number of new customers.
Bittrex supports algorithmic trading and empowers its customers with extensive APIs for more automated and profitable trading.
One of the common features which is not available on the exchange is margin trading. No leverage used however adds up to the exchange's stability and prevents fast money seekers and risky traders from entering the exchange.
Bittrex is a force of the blockchain revolution and an important entity of the emerging sector.
The full version
Getting a bank loan can sometimes seem like an impossible task. There is a credit history to check, collateral to provide, and other complex little details. Now, in times of the global financial crisis, banks will likely be even more cautious about giving out money.submitted by QDAODeFi to u/QDAODeFi [link] [comments]
This is why DeFi-based crypto loans are booming. The sector is still relatively new – it emerged around two and a half years ago. And since then, it has experienced rapid growth. Take a look at this graph demonstrating the cumulative lending to institutions by Genesis Lending Originations – one of the major OTC-platforms.
By the end of the first quarter of 2020, the company gave out loans worth $1 billion. And that’s just Genesis Lending. Compound, the current leader among DeFi platforms currently has over $883 million in outstanding debt.
QDAO DeFi is launching a crypto loan feature as well. Users can deposit their crypto, borrow fiat and take their crypto assets back after paying the small interest rate – simple as that. The service is available to everyone with internet access and provides outstanding benefits to users.
We will demonstrate use cases for three different types of borrowers: private persons, traders and institutional investors. Most likely you’ll recognize at least one of these situations.
Disclaimer: the interest rates stated below serve only as examples and are subject to change. Always check the current rates on the QDAO DeFi Loans page.
Example 1. The borrower is a private person
This is the most basic use case in which the DeFi platform functions similar to a pawnshop.
Let’s assume that a person has already bought or is planning to buy 1 Bitcoin and is committed to holding on to it. The new rally is coming soon and this person is getting ready to cash out. However, due to some circumstances, they need fiat money now, preferably as fast as possible.
This person could sell Bitcoin. But if they don’t buy it back soon, they might lose the opportunity for profit.
Now, there is no need to choose between taking care of urgent issues and keeping the asset. Anyone can simply use crypto as collateral.
Let’s say that at the moment, Bitcoin costs $9,000. If the borrower puts it in QDAO DeFi, they can get up to 50% of crptocurrency’s value in fiat, i.e. $4,500. There is no credit check or extensive paperwork involved and all transactions are practically instant.
The borrower uses the cash however they see fit. Meanwhile, their collateral remains untouched in Custody Storage. The monthly interest is, for example, 2%. So if this person wants to get his Bitcoin back in three months, they will only need to pay $4,770. By this time, the price of their Bitcoin might have gone well above $10,000, so the deal is quite lucrative.
Example 2. The borrower is a crypto-trader
Let’s look at a serious crypto-trader who has 10 Bitcoins. The market is leaving the consolidation phase and is preparing for a rally.
They are serious about committing to a ‘HODL’ strategy and want to keep their Bitcoins. At the same time, this trader continues to make deals on exchanges to enhance future profits. After studying Ripple, they decide that it would make a nice addition to their portfolio and want to buy it. But this trader doesn’t have disposable funds to acquire enough XRP.
Since the Bitcoins are just sitting in a wallet, these assets can be used to acquire fiat resources. If the trader deposits all their Bitcoins (worth $90,000), they will get a significant boost of up to $45,000. And the best part is that the loan is in USDT, so it’s possible to just swap Tether for Ripple without extra transactions.
Let’s assume that the trader sells XRP in four months. They use part of the profit to cover the assumed interest of 2% ($3,600) then take the rest for themself and retrieve their Bitcoins.
Example 3. The borrower is an Institutional investor
There is a crypto fund or an asset management company with high net worth, long-term clients. This agency has a sizable portfolio that includes major stocks like Amazon and Apple as well as crypto assets like Bitcoin, Ripple and Ethereum.
10,000 Bitcoins are under the management of this company – so the combined asset worth is $90,000,000. According to the latest market analysis, BTC will stand at about $20,000 in 2021 and by 2025, it will stand at about $100,000. So obviously the agency should hold on to Bitcoin and the clients agree.
However, there is a very big IPO coming soon. The company has a unique opportunity to buy very promising stock. In several years, this investment will result in a very profitable exit.
But the current budget limits the volume of the possible investment. The agency is going to get more funds in two months, but the opportunity will be gone by then.
Since the company is going to be holding Bitcoin for some time anyway, it decides to use it as collateral. By depositing the assets in QDAO DeFi, it will receive a loan of up to $45,000,000. Investors use the money to buy shares. In two months, the company pays out the assumed interest ($1,800,000) and reclaims the Bitcoin.
The clients and the management are happy, because now the agency has even more great assets in the portfolio.
Example 4. The borrower does not repay the loan
Someone follows the usual process – puts 3 Bitcoins into QDAO DeFi and takes the $13,500 fiat loan.
For whatever reason, this person does not repay the debt for 7 months while the interest keeps growing. There is a sudden volatility spike and the Bitcoin price goes down to $5000 for a time, hitting the margin call mark. This is less than the original loan, so the borrower has no reason to repay it and cover the interest, since that would mean a complete loss for them. There is also no reason for QDAO DeFi to store this person’s Bitcoin.
The borrower is notified that the assets are now the property of QDAO DeFi and the loan is closed. No further legal action is taken and no penalties have been incurred for defaulting on the loan.
The ability to choose almost all the terms of a cash loan with QDAO DeFi provides unlimited opportunities to get money for any purpose. By planning ahead, all borrowers can get additional fiat assets to multiply their profits while still retaining everything they had before taking out the loan.
Want to be the first to hear QDAO DeFi news and updates? Visit our website and stay in touch with us on social media: Twitter, Facebook, Telegram and LINE (for the Japanese-speaking community).
Before I tell you how to find your address, I will first make it clear, within the italicized text, exactly which address you are looking for, if you are not already sure:
You may also skip the text written in italics if your issue does not include an ERC20 token, if you wish.
Ledger Live can confuse some users with its interface. On LL, to manage an ERC20 token, you first must go to your Ethereum account and add the token. When you then click on the added token under "Tokens" below the graph chart for your account's ETH amount over time, the screen will then open a new screen, that looks just the same, except focused on the specific ERC20 token. To confuse users further, there is then an option to "Star account", which then add the ETH icon with the ERC20 token's first letter or symbol overlapping, onto the easy access sidebar, as if it was another account of similar independency to the ETH account it was added to.
This improperly displays the two "accounts" relation to each other.
Your ERC20 holdings (at least for any and all ERC20 that I know of) are "held" in the exact-same address as the Ethereum address it was added to, which also "holds" any Ether you've added to it. You send both Ether (ETH) and any ERC20 Tokens to and from only Ethereum addresses of equivalent capabilities, in both qualities and quantities. In all basic terms and uses, they are the same.
So, to know what the problematic account's address is, find the address of the Ethereum account it was added to in Ledger Live.
Now, to find your address on MyCrypto, the most reliable way to find it, that I am aware of, is this:
Open Ledger Live. Go to the screen of your Ethereum address (again, this is the one that you added your ERC20 token, if applicable. If you're not dealing with an ERC20 token, you may ignore everything I've put in Italics). Click on "Edit account"; this is the icon next to the star that may look like a hex-wrench tool. On the new screen-overlay, you will see "> ADVANCED LOGS". Click on the ">" and it will point down while revealing a drop-down with some data that you may or may not recognize/understand. Likely to be found indented and in the middle-ish area, you will see this line, or something hopefully similar:
The "X" will probably be the only thing that changes, and the actual data will have a number in its place; it will not be a letter. Let's now put that line to use in MyCrypto:
Take the 44'/60'/X'/0/0 , and make sure you DO NOT copy the quotation marks, or that comma at the end either.
You can do this before or after copying and/or pasting, but drop the second "/0" at the end; it was not necessary in my case, I expect that you won't need it either, and will probably just make MyCrypto see it as an invalid input.
Okay, now go back to the "Select an Address" screen-overlay in MyCrypto.
Next to "Addresses", click on the box on the right, and you should be shown a list of options to select from in a drop-down menu.
Scroll all the way down, and you should find the "Custom" option at the very bottom. Select it.
A new box will appear; probably directly to the right of the now-shortened box that now displays the "Custom" option that you just selected. This box will offer an interface for typed input. ...yep... once again, believe it or not, you should click it.
Type " m/ ", no spaces before or after.
Type in or paste the data we retrieved from ledger live.
The box should now hold this:
Again, X should be a number. In fact, that number is probably equal to the number of Ethereum (not including any ERC20 wannabe) accounts that you've made on Ledger Live before making the one we're working on right now! (1st Eth. Acc. would have: X = 0, 2nd: X = 1, 3rd: X = 2, ...)
Make sure you've included every apostrophe ( ' ), and solidus ( / ); there is NO APOSTROPHE for the "m" at the start and the "/0" at the end!
If you press the enter key or click on the check-mark to the right of where you typed, the appropriate addresses will be generated, and the address you created through Ledger Live should be the first one on the list!
Select your address and press "Unlock", and you are now accessing your account through the MyCrypto app's interface!
In order to access your ERC20 token, you will need to add them first.
You may have to scroll down, but on the right-side of your unlocked account screen, you'll see a box with "Token Balances" as its header.
Click "Scan for tokens". This may take a short bit of time, and when it's done it may or may not display your ERC20 token. If it worked, you can head on back to the main part.
If you got the result I did, it won't display your token, or, if our result was exactly the same, it won't display any at all. However, you should now have the "Add Custom Token" option available, so see where that takes you.
You should discover four boxes, specified in order (Address/ Decimals / Token_Symbol / Balance). You may only need to fill in the "Address" box, but if you need to fill others, you'll find those with the token's address; here's 2 ways to find it, if you don't already know.
Since you've probably already been managing your token with Ledger Live, you can go to the LL screen of your "account" for that token; Right next to the account's icon, and directly above the name, you'll see:
Yes, go on; click it. You'll find the token's page on Etherscan; this was just a shortcut to the same place that both of the two previously referenced methods lead to. Skip to method... III?
Go to Etherscan.com, or a similar Ethereum-blockchain-monitoring website, if you have a different preference. Search for the name of your token, and you should be able to see it as a search result. Activate your search manually of by selecting search option. Continue on with Method III.
Method III (I&II; what makes you think there was a third method? I said 2!):
At this point, you should find the "contract address" somewhere on the screen. This is the identity of the creature that breathes life into the token, allowing it to exist within the world of Ethereum. Steal it, and tell MyCrypto that you've left some of "your" tokens in the address of your ledger's Ethereum account. MyCrypto will trust and believe you without any concern or doubt, just by putting "your" contract address in the box for "Address"; it's almost too easy!
Well whaddya know, this one isn't actually too long! Don't tell anyone who may have taken a little longer whilst finding out how to do it themselves, though. There's value in trying to do something on your own, at least at first, so I'll let them think they made the right choice (¬‿¬). But take this star for humbling yourself enough to seek further help when you need it, since that is a very important life skill as well!
Now, back to the useful stuff at the top...
submitted by CelesOS to u/CelesOS [link] [comments]
The consensus mechanism is one of the important elements of the blockchain and the core rule of the normal operation of the distributed ledger. It is mainly used to solve the trust problem between people and determine who is responsible for generating new blocks and maintaining the effective unification of the system in the blockchain system. Thus, it has become an everlasting research hot topic in blockchain.
This article starts with the concept and role of the consensus mechanism. First, it enables the reader to have a preliminary understanding of the consensus mechanism as a whole; then starting with the two armies and the Byzantine general problem, the evolution of the consensus mechanism is introduced in the order of the time when the consensus mechanism is proposed; Then, it briefly introduces the current mainstream consensus mechanism from three aspects of concept, working principle and representative project, and compares the advantages and disadvantages of the mainstream consensus mechanism; finally, it gives suggestions on how to choose a consensus mechanism for blockchain projects and pointed out the possibility of the future development of the consensus mechanism.
First, concept and function of the consensus mechanism
1.1 Concept: The core rules for the normal operation of distributed ledgers
1.2 Role: Solve the trust problem and decide the generation and maintenance of new blocks
1.2.1 Used to solve the trust problem between people
1.2.2 Used to decide who is responsible for generating new blocks and maintaining effective unity in the blockchain system
1.3 Mainstream model of consensus algorithm
Second, the origin of the consensus mechanism
2.1 The two armies and the Byzantine generals
2.1.1 The two armies problem
2.1.2 The Byzantine generals problem
2.2 Development history of consensus mechanism
2.2.1 Classification of consensus mechanism
2.2.2 Development frontier of consensus mechanism
Third, Common Consensus System
Fourth, Selection of consensus mechanism and summary of current situation
4.1 How to choose a consensus mechanism that suits you
4.1.1 Determine whether the final result is important
4.1.2 Determine how fast the application process needs to be
4.1.2 Determining the degree to which the application requires for decentralization
4.1.3 Determine whether the system can be terminated
4.1.4 Select a suitable consensus algorithm after weighing the advantages and disadvantages
4.2 Future development of consensus mechanism
Last lecture review: Chapter 1 Concept and Function of Consensus Mechanism plus Chapter 2 Origin of Consensus Mechanism
Last lecture review: Chapter 3 Common Consensus Mechanisms
Chapter 3 Common Consensus Mechanisms (Part 2)
Figure 6 Summary of relatively mainstream consensus mechanisms
Source: Hasib Anwar, "Consensus Algorithms: The Root Of The Blockchain Technology"
The picture above shows 14 relatively mainstream consensus mechanisms summarized by a geek Hasib Anwar, including PoW (Proof of Work), PoS (Proof of Stake), DPoS (Delegated Proof of Stake), LPoS (Lease Proof of Stake), PoET ( Proof of Elapsed Time), PBFT (Practical Byzantine Fault Tolerance), SBFT (Simple Byzantine Fault Tolerance), DBFT (Delegated Byzantine Fault Tolerance), DAG (Directed Acyclic Graph), Proof-of-Activity (Proof of Activity), Proof-of- Importance (Proof of Importance), Proof-of-Capacity (Proof of Capacity), Proof-of-Burn ( Proof of Burn), Proof-of-Weight (Proof of Weight).
Next, we will mainly introduce and analyze the top ten consensus mechanisms of the current blockchain.
Delegated Byzantine fault tolerance. The improved Byzantine fault-tolerant algorithm makes it suitable for blockchain systems. The system consists of nodes, delegators (who can approve blocks), and speakers (who proposes the next block). It is a consensus algorithm that guarantees fault tolerance implemented inside the NEO blockchain.
In this mechanism, there are two participants: the professional bookkeeper "bookkeeping node" and the ordinary users in the system.
Ordinary users vote based on the proportion of holding stake to determine the bookkeeping node. When a consensus is required, a spokesperson is randomly selected from these bookkeeping nodes to draw up a plan, and then other bookkeeping nodes will vote basing on the Byzantine fault tolerance algorithm.That is, majority principle. If more than 66% of the nodes agree to the spokesperson’ plan, a consensus is reached; otherwise, the spokesperson is re-elected and the voting process is repeated.
-Representative application: Neo, etc.
Proof of authority. That is, certified by some accredited accounts, these accredited accounts are called "validators". The software that the verifier runs that supports the verifier to place transactions in blocks.
-Representative applications: VeChain, etc.
Directed acyclic graph. Each newly added unit in the DAG is not only added to the long chain block, but added to all the previous blocks, verifying each new unit and confirming its parent unit and the parent unit of the parent unit, and gradually confirming until the genesis unit. As the hash of its parent unit is included in its own unit, the blockchains of all transactions are connected to each other to form a graph-like structure with time.
In the DAG network, each node can be a trader and a validator, because the transaction processing in DAG is done by the transaction node itself. Taking IOTA as an example, IOTA’s Tangle led
ger does not need to pay transaction fees while ensuring high-speed transaction processing. However, it does not mean that the transaction is free, because in this ledger, the initiation of each transaction needs to verify the other two random transactions first, and connect the transaction initiated by itself to these two transactions, so the responsibility that miners on the blockchain bear is distributed to all traders. The DAG method of processing transactions can be called asynchronous processing mode.
Figure 10 The difference between the traditional blockchain structure and the DAG structure
-Representative applications: IOTA, etc.
Proof of elapsed time. That is, it is usually used in a permissioned blockchain network. It can determine the mining rights of the block holders in the network. The permissioned blockchain network requires any prospective participants to verify their identity before joining. According to the principles of the fair lottery system, each node is equally likely to become the winner.
Each participating node in the network must wait for a randomly selected period, and the first node to complete the set waiting time will get a new block. Each node in the blockchain network will generate a random waiting time and sleep for a set time. The node that wakes up first, that is, the node with the shortest waiting time, wakes up and submits a new block to the blockchain, and then broadcasts the necessary information to the entire peer-to-peer network. The same process will be repeated to find the next block.
Proof of stake velocity. Proposed by Reddcoin, drawing on the concept of "money circulation speed" in economics, it mainly allocates bookkeeping rights based on the coin age of nodes participating in the competition.
PoSV also allocates accounting rights according to the coin age of the nodes participating in the competition, but modifies the coin age calculation formula to a function of exponential decay of growth rate. Taking Reddcoin as an example, Reddcoin sets the half-life of the coin age growth rate to 1 month. Assuming that the unit token can accumulate 1CoinDay coin age on the first day, only 0.5CoinDay coin age can be accumulated on the 31st day, and only 0.25CoinDay coin age can be accumulated on the 61st day, and so on. In this way, the nodes are encouraged to use the token to conduct a transaction after holding the token for a period of time, thereby restarting the calculation of the coin age and increasing the circulation speed of the token in the network.
-Representative applications: Reddcoin, etc.
Table 2 Comparison of the advantages and disadvantages of current mainstream consensus mechanisms
Source: network resources
Chapter 4 Summary of the Selection and Status Quo of Consensus Mechanism
4.1 How to choose a consensus mechanism that suits you
Step 1: Determine whether the final result is important
For some applications, the end result is very important. If you are building a new payment system that can support very small amounts, it is acceptable for the transaction result to change. Similarly, if you are creating a new distributed social network, 100% guarantee that the status is updated immediately is not particularly necessary. On the contrary, if you are creating a new distributed protocol, the final result is critical to the user experience. For example, Bitcoin has a final confirmation time of about 1 hour, Ethereum has a final confirmation time of about 6 minutes, and Tendermint Core only has a final confirmation time of 1 second.
Step 2: Determine how fast the application process needs to be
If you are building a game, is it reasonable to wait 15 seconds before each action? Due to the low block processing time of Ethereum, games built on it will cause poor user experience due to Ethereum's throughput. However, the application for the transfer of housing property rights can be run on Ethereum. Use the Cosmos SDK to build an application that allows developers to freely use Tendermint Core. It has a short block processing time and high throughput, and is capable of processing 10,000 transactions per second. You can reduce the required communication overhead and speed up the application by setting the maximum number of validators for the application.
Step 3: Determine the application's demand for decentralization
Some applications such as games may not require very high censorship resistance as a by-product of decentralization. In theory, does it really matter that the validator can create a cartel in the game and reverse the transaction result for profit? If it is not important, a blockchain such as EOS may be more suitable for your needs because of the fast transaction speed and free fees. However, some applications such as autonomous banks are more powerful and decentralized. Although Ethereum is considered to be decentralized, some supporters claim that Ethereum's mining pool is an important part of centralized platform, although there are actually only 11 validators (mining pools). One of the major benefits of building your own blockchain instead of building on a smart contract platform is that you can customize the way the application completes verification. However, it is difficult to build your own blockchain, so the Cosmos SDK is very useful, you can easily build your own blockchain and customize the degree of decentralization you need.
Step 4: Determine whether the system can be terminated
If you are building a new application similar to a distributed ride-sharing service, then ensuring 24/7 service must be the first priority, even if there are occasional errors in accounting similar to transactions. One of the properties of Tendermint Core is that if there is a disagreement between network validators, the network will suspend operations instead of proceeding erroneous transactions. Applications such as decentralized exchanges require correctness at all costs-if there is a problem, it is far better to suspend trading on the decentralized exchange than there may be trading problems.
Summary: Choose a suitable consensus algorithm after weighing the advantages and disadvantages
All in all, there is no single best consensus algorithm. Each consensus algorithm has its own value and advantages. You need to have your own judgments and choices. However, by understanding the relevant processes of the consensus mechanism, including proposals and agreements, and establishing a framework to consider the types of consensus algorithms that your application may require, you should be able to make wiser decisions.
4.2 Future development of consensus mechanism
The consensus algorithm is one of the core elements of the blockchain. Although there are more than 30 consensus mechanisms listed in the article, there are still many niche consensus mechanisms that may not be discussed. As the blockchain technology is gradually known and accepted by the public, more and more newer and better consensus algorithms may appear in the future, which may be brand-new consensus algorithms, and more should be improvement and optimization version based on the current consensus algorithm.
After 2016 and 2017 years’ fast development, the current consensus algorithm does not have a recognized evaluation standard, but is generally more biased towards fairness and decentralization, as well as some technical related issues, such as energy consumption and scalability , Fault tolerance and security, etc. However, blockchain technology must be combined with requirements and application scenarios, and the consensus mechanism algorithm and incentive mechanism are inseparable. How to customize a suitable consensus mechanism according to the characteristics of your own project and optimize the current consensus mechanism will become the future direction of consensus mechanism development
As the first DPOW financial blockchain operating system, CelesOS adopts consensus mechanism 3.0 to break through the "impossible triangle", which can provide high TPS while also allowing for decentralization. Committed to creating a financial blockchain operating system that embraces supervision, providing services for financial institutions and the development of applications on the supervision chain, and formulating a role and consensus ecological supervision layer agreement for supervision.
The CelesOS team is dedicated to building a bridge between blockchain and regulatory agencies/financial industry. We believe that only blockchain technology that cooperates with regulators will have a real future. We believe in and contribute to achieving this goal.
Bitcoin live price charts and advanced technical analysis tools. Use Japanese candles, Bollinger bands and Fibonacci to generate different instrument comparisons. Charts providing a snapshot of the Bitcoin Cash (BCH) ecosystem When Bitcoin started out there wasn’t really a price for it since no one was willing to buy it. The first time Bitcoin actually gained value was on October 12, 2009 when Martti Malmi, a Finnish developer that helped Satoshi work on Bitcoin, sold 5050 Bitcoins for $5.02. This gave 1 Bitcoin the value of $0.0009. How Much was Bitcoin Worth at ... Here s a bitcoin historical graph showing the rythmic heartbeat bitcoin history price since 2009 to 2018 btc charts wiki from 900 to 20 000 bitcoin s historic 2017 price run revisited bitcoin price index monthly 2016 2018 statistic price of bitcoin in 2017 india bitcoin crashes below the 5 mark loses 35 of it s value mive. Coingeeko – Above chat source is CoinGeecko this is amazing Chart provider, most of the time I use CoinGeecko website to see BTC Price Chart because it’s shows everything Clearly like you can see Bitcoin past History, supported Exchanges this website become A World #1 website very soon, I strongly recommend to bookmark the site to check for check bitcoin price chart.
[index]          
bitcoin historical price action is pure art 2x speed - Duration: 2:24. bitcoin Salvador 10,200 views. 2:24 . Future Price Prediction of Bitcoin and Cryptocurrencies - Duration: 2:26. Tommy World ... This video represent history of BTC-USD exchange rate until 2017.12.07. Bitcoin price is like crazy right now. How much will rising up? and, How much will fa... Bitcoin Price Evolution - Chart Time-lapse 2010 - 2020 Music: Bisiesto - Hiracutch (Music promoted by Audio Library) Bitcoin history – Price 2009 to 2018, Charts, Data – Bitcoin View Bitcoin's price since its inception in 2009 and all the way up to today. Complete with historical events and how they affected ... Incredible BITCOIN Price Movement 2009 to 2017 ..what will be his next step...? More Information https://www.cryptooos.com/ Buy Bitcoin(Lambo) here https://c...